Fall Protection Forum
Equipment Comparisons
Rigid Lifelines Anchor Trolley™ Advantages
As of 2020, there are many rigid track overhead fall arrest systems on the market. Rigid Lifelines® is proud to be one of the first,…
Recent Posts
August 26, 2013
Rigid Lifelines Improves Safety at Intergulf
Intergulf Corporation is a leading industrial liquids management company specializing in procuring,…
June 28, 2013
Protection in Production
There are many times that a worker in an industrial or construction…
March 27, 2012
768 Foot Multiple Post System Protects Steel Mill Workers on Flatbed Trucks
A large flat rolled steel mill based in Ohio converts scrap steel…
March 18, 2011
336 Foot Fall Protection System Protects Workers Accessing Gondola Railcars
The US Government oversees a contaminated work site in the northeastern United States where radioactive thorium was processed during the early twentieth century. A large environmental services group was contracted by the government to remediate part of the job site and return it to a usable state. The remediation process…
November 22, 2010
Fold-Away Anchor Track™ System Provides Fall Protection Under Overhead Cranes
In 2008, Rigid Lifelines® introduced the Fold-Away Anchor Track™ system. Engineering of this system started when end-users came to Rigid Lifelines® and expressed interest in a fall protection system that did not require permanent installation and had some mobility. Many end-users complained that a permanent structure would interfere with their…
October 15, 2010
Rigid Fall Arrest System Provides Worker Safety For Tank Truck Unloading
A major manufacturer of chocolate confections and industrial confectionery ingredients receives up to four shipments of liquid chocolate on a weekly basis. The liquid chocolate is transported to their manufacturing facility in 6,500 gallon tank trucks. Trucks dock at a station in the rear of the facility where the driver…
September 20, 2010
Corporate Aircraft Hangar Improves Safety & Efficiency With Rigid Lifelines Fall Arrest Systems
A major private northeastern airport is home to a corporate aircraft hangar for a large international company. The hangar houses a branch of the company’s aircraft, including three jets and two helicopters. These aircraft are flown on a weekly basis, depending on executive’s travel needs. As the aircraft move in…
August 18, 2010
Six Man Portable Gantry Fall Protection Used Over Military Aircraft Mock-Ups
An aircraft training and simulator facility located in the southern United States, handles outsourced manufacturing of F22 Raptor aircraft mock-ups for pilot training/simulation for the United States Government. The manufacturing process involves the building of the F22 mock-ups in three sections, the aft, the arm, and the landing gear. These…